Welcome to tattoo DIY!| Sign In | Register
Home >  Tattoo Wiki >  Tattoo needles >  The reason is not good secant

The reason is not good secant

RSS Feed
Tuesday 16 June, 2015 Written by tattoodiy
the point is not accurate when the needle into the needle position; Tattoo needle when installation with fixed to tattoo swinging; In the process of the tattoo needle mouth in the not enough pigment; Tattoo machine speed too fast, or too much of the machine; When the needle into the skin, the skin is not tighten. If above all noticed, there is no problem, you will make a clear outline. 
1. The unstable line 
Machine running too fast; The needle is not stable and jitter; Hand shake; Touch the customers. 
2. The dark side or double line 
Needle into too deep; Tip bend to hang in the skin tissue; Confetti blocked the needle; Machine too fast; Hand too slow. 
3. The weak line 
Apex of not enough pigment; Skin pull enough flat; Broken needle at the bottom of the team; 
4. The uneven spacing of lines 
The tip is damaged; About jitter. 
5. The needle to stop procrastination in the skin 
Tattoo machine runs too slow, make its acceleration. 
If you think that the line of grain line is you want, your hand will automatically to carry on with it, so the tattoo of feeling is very important. Don't hesitate or intermittent, should let the line without interruption smoothly draw down. Before you draw a long line, first dip of standard purity, that wouldn't be in the painting the pigment used up half of the time. If you know the location, at the beginning of the line and line position, at the end of the middle section will smoothly with your feeling. 
 
Newsletter: for the latest offers, discount and site activity! Your email address: