Welcome to tattoo DIY!| Sign In | Register
Home >  Tattoo Wiki >  Tattoo power >  Adjust tattoo power box to work

Adjust tattoo power box to work

RSS Feed
Friday 27 December, 2013 Written by tattoodiy

There is no doubt that tattoo machine is initial parts for the tattoo artist. However the tattoo power box is also important during the tattoo work. Because you can image that if there is no tattoo power box to offer energy for you the tattoo machine could not work.When tattooing, tattoo artists want to take control of how fast the sterilized tattoo needles moving back and forth in the skin. A proper speed of that will do something to relief the pain of their clients. A tattoo power supply is the device that enables them to do so.
 So you should know how to plug in a tattoo power box at first.
The first thing is to gather information. Take good advantage of anything that can help you gain knowledge, such as the Internet, your local library, a professional tattoo artist nearby etc. you should get to know the components of a machine power supply to solve the problem about how it affects the throw and speed of tattoo machines.
First of all you should know the basic information about the tattoo power box. If you have some friend in the tattoo industry , i think he or her could do you a big favor. If not you could buy some books about it and search on the internet. What you must know is the components of the tattoo power box to solve the problem.
Then take a close look at your tattoo power box. You can see two jacks on its front, one for foot pedal and the other for connecting to tattoo machine. The power cord is on the back. When start working, remember to put it in a well sterilized environment.
 After the foot pedal is placed on the floor close to your tattoo chair, straighten its cord to plug the opposite end into the tattoo power supply and make the cords lay flat on the ground. If you feel it easily to be tripped by the cord, you may move the machine power supply closer to the edge of the workstation. Just make sure it won’t be an obstacle for your tattooing process.
Now plug the cylindrical end of the clip cord into the machine power supply to connect the opposite end where the cord is divided into two branches. Then find the binding posts on the back of your tattoo machine, around which, the curved metal sections will be hooked. The last thing is to insert its power cord into a wall outlet.
For the sake of safety, you should make some tests for that. Hold the tattoo machine in one hand and press down on the pedal with one foot at the same time. If your tattoo machine begin to hum and the needles inside start to move back and forth, then you have get your tattoo power box properly plugged in.

Newsletter: for the latest offers, discount and site activity! Your email address: